How to sand and refinish your floors like a handyman

handyman services in Commerce Township

Now that your house is furnished, it’s time to keep the shine going. But if you’re a DIYwho doesn’t want to deal with taking out your rug and piling up those old magazines, the good news is, that refinishing floors is easy. Here’s how to get the most out of your floors with simple sanding and sealing.You’ll need:

First things first: Get yourself a microfiber cloth or two. While you can use an old towel, it’s best to have a cloth that’s about 1/4 inch thick. This is a good rule of thumb for any surface.

Next, you’ll want to go with a spray cleaner. If you’re not sure what kind of cleaner to use, read the label on your favorite aerosol or bottle cleaner.

Once you have your cleaner, you’ll want to spray it on your floors. It’s best to get it on your furniture first, then on the floors.

Spray as much of the cleaner as you can, but make sure you’re not overdoing it. Spray enough to get a really good soaking into the wood.Let it sit for 30 minutes, then wipe it up. This will get rid of most of the grease.

You’ll want to do this for any bare wood in your house. You’ll be surprised how dirty your floors are once you start cleaning.After you’ve cleaned up the floors, use your microfiber cloth to wipe up any excess cleaner.


Then it’s time to get down to business.

Before you begin, make sure handyman services in Commerce Township have a bucket or basin to hold your sanding supplies. You’ll also want a sponge, some rags, a clean dust mask and a trash bag. You’ll also want to have your microfiber cloths handy to clean up any spills.

First, you’ll want to mix up the water and your salt. Next, you’ll want to mix up your cornstarch, then the vinegar, oil, and lemon juice.Mix it all up in a container or bowl. You’ll want to have your rags and the sponge in hand.

First, grab a rag and start wiping down the entire room, especially any bare wood.After you’ve done that, grab a sponge and start scrubbing. Start by wiping down the edges of your baseboards, then work your way around.